Como

hi, after renewed root ca certificate , published crt , crl ad containers, open mmc enterprise pki on domain computer (such issuing ca), enterprise pki spins while stops. application event id 1000 faulting application name: mmc.exe, version: 6.1.7600.16385, time stamp: 0x4a5bc808 faulting module name: pkiview.dll, version: 6.1.7601.17514, time stamp: 0x4ce7c95f exception code: 0xc0000005 fault offset: 0x00000000000356d9 faulting process id: 0x850 faulting application start time: 0x01cf2f2365d59908 faulting application path: c:\windows\system32\mmc.exe faulting module path: c:\windows\system32\pkiview.dll report id: c14df7c4-9b16-11e3-8648-00155d61630b could indicate what's cause , solution? thanks. hi jack, do have updates on issue? i suggest refer similar threads below: application error id 1000 http://social.technet.microsoft.com/forums/windowsserver/en-us/63d8479e-7b61-4f7b-a99c-7da835995955/application-error-id-1000?forum=winservergen mmc kee...

hi, the dashbord om (dutch) server stops working (disappears) during initialising (no error message). not start on clients al all. windows server health service not start either. after server reboot dashbord show disappears when trying start "meldingskennisgeving per e-mail" (e-mail notification). when try start dasbord again disappears instantaneously without showing al all. what can repair this.? here event id messages (sorry, partly in dutch). logboeknaam:   application bron:          application error datum:         30-12-2014 12:01:56 gebeurtenis-id:1000 taakcategorie: (100) niveau:        fout trefwoorden:   klassiek gebruiker:     n.v.t. computer:      myserver.mydomain .local beschrijving: naam van toepassing met fout: dashboard.exe, versie: 6.2.9805.0, ...

i need upgrade win2003 ad-integrated dns-dhcp server win2008r2. ad domain controllers win2003. how update win2003 ad schema work new win2008r2 dns-dhcp server? hi, before introducing first 2008 dc 2003 domain, need extend schema or preparing forest , domain running adprep command. in windows server 2008 r2 disk, adprep available in 32-bit version ( adprep32 ) , 64-bit version ( adprep ). 64-bit version runs default. if existing dc 32 bit use adprep 32. adprep /forestprep -must run on schema operations master forest. -once entire forest adprep /domainprep -must run on infrastructure operations master domain. -once in each domain plan install additional domain controller runs later version of windows server latest version running in domain. adprep /domainprep /gpprep -must run on infrastructure operations master domain. -once in each domain within forest link of adds domain upgrade document: upgrading active directory domains windows server 2008 , windows serv...

hi guys, i've done validation on 1 of our clusters here, , of updates missing on host. no big deal, until try , download them, , told they're invalid! i've double checked i've not done stupid, , have downloaded correct ones os (server 2008 r2 hyper-v sp1) , fail saying update not applicable, when are! ideas on valid download location following can use...? kb2749655, kb2739159, kb2688338, kb2659262, kb2620712 cheers, rich what running situation updates applied in different orders on different machines.  updates supercede other updates.  means if happened patch 1 server in little different sequence server, can end warning - note, warning, not critical.  warnings mean need examine make sure okay in environment. so have @ details of 'missing' patches.  see if superceded patch applied.  there other things can happen similar results.  if comfortable have updated nodes company's security requirements, can ignore warning. .:|:.:|:. tim ...

i'm building test cluster on vmware 4.1u1. attempting configure cluster file share majority quorum method. however, configuration shows warnings on storage section of validation tests. "list potential cluster disks" test comes warning saying "no disks found on perform cluster validation tests." rest of tests show warnings because aforementioned test warning. i'm guessing isn't supported configuration since tests not explicitly pass. documentation states file share majority option multi-site cluster. how such configuration supported if there no possibility of shared disks between sites? for configuration in step-by-step, connecting cluster servers storage required if cluster will have number of nodes , choose cluster quorum configuration called node , disk majority . if cluster have number of nodes, not required connect servers storage if choose quorum configuration called node , file share majority . ( if cluster have odd number of nodes, n...

hi how can change hyper-v cluster ip address , consequences? i've hyper-v cluster ip in dhcp range want to change to static. appreciate if can assist me. brgds shanavas if select cluster name @ top of left pane, in middle pane, expand cluster core resources listing.  expand cluster name , ip address listed.  right-click on ip address , select properties.  on general tab, should able change ip address static entry. chuck timon senior, support escalation engineer (see) microsoft corporation Windows Server  >  High Availability (Clustering)

buenas tardes como puedo configurar un dominio adicional en exchange 2013 sin afectar el principal y que envíe y reciba, estuve leyendo y me dicen que debo efectuar un multi-tenancy,  crear las tablas tipo a, cname, mx y prt,  como se efectúa este proceso   gracias hola ruben,  no queda claro en tu pregunta si te refieres un exchange 2013 on premise o office 365.   asumiendo que sea on-premise, para añadir más de un dominio, puede abrir la consola de administración de exchange, desplegar "organization configuration", ir "hub transport" y añadir los dominios que quieras en "accepted domains".  para que el correo enviado direcciones de esos dominios lleguen tu servidor de exchange, necesitas dar de alta un registro mx en internet para el dominio que apunte tu servidor exchange. lo ideal, es que tu servidor exchange ya esté dado de alta en dns como registro a; por tanto, el mx apuntará al nombre de tu servidor ex...

dear support,  i need import  snapshot  to hyper-v. show me how can ?! thanks  huy a snapshot / checkpoint not standalone copy of point in time. it dependent on in timeline before it. you can export single snapshot / checkpoint beginning hyper-v 2012. then import. brian ehlert http://itproctology.blogspot.com learn. apply. repeat. Windows Server  >  Hyper-V

hi, i have 2 templates mapped(to customxml) rich text content controls within tables. content controls in question are locked down user cannot remove them or edit them. side note, document it's self has protected areas. as said, have 2 template. can call them template , b. i have rich text content control within template user can enter text into. rich text content control lies within table cell and is mapped customxml node. in template b have rich text content control lies within table cell which can see receiver of text entered in template a. difference between 2 rich text content controls in template , b in template b rich text content control locked down user cannot edit or delete content control. as might have figured out, when open template b pull data template rich text content control , place within customxml node mapped rich text content control within template b. all in all, text template transfered template b. my prob...

hi, we configuring ad fs (federation services) to access webapplications on different zone, wanted few things on high-level.  these applications intended users, possible @ ad fs end setup restrictions in such way if non-us user try access these applications should not allow or page should redirect page seek further approvals. ou level restrictions in other words. thanks in advance, sravan for better assistance related adsf ask in adfs forum: http://social.msdn.microsoft.com/forums/en/geneva/ best regards, sandesh dubey. mcse|mcsa:messaging|mcts|mcitp:enterprise adminitrator | blog disclaimer: posting provided "as is" no warranties or guarantees , , confers no rights. Windows Server  >  Directory Services ...

  allow log on locally ->local security settings-> "add user or group" function disabled (grayed out on member server ) - administrators group added policy part of server hardening , i'm member of administrators group. hi, this issue can caused site, domain , ou level gpo group policy “allow log on locally” wins local gpo same group policy setting. in order find group policy takes effect. please run rsop.msc on computer. in resultant set of policy console, navigate to:  computer configuration\windows settings\security settings\local policies\user rights assignment on right pane, locate “allow log on locally” policy, check source gpo. regards, miya miya yao technet community support Windows Server  >  Group Policy ...

ldap shows user's home directory empty, though believe set it.  using ldap browser view ldap settings , check using simple vb script. having no luck setting home directory user.  note: not looking how set user's home folder. realize can set user's home folder in adu&c, setting value (i tried both home foler & terminal home folder) not affect ldap attribute "home directory".  how set this? thank [in advance]! -tg23 hi, add home directory attribute gc help: http://technet.microsoft.com/en-us/library/cc737521(ws.10).aspx thanks. Windows Server  >  Directory Services

all old ms word excel file not opened, showing file conversion error , when click on ok open unreadable language. ms repair option (open & repair) best method repair corrupt word & excel files fails repair due level of corruption. @ scenario, following methods you: try restore fresh copy try open corrupt files openoffice try repair corrupt file using file repair software stellar phoenix, getdata, kernal etc. reference:  how open corrupt microsoft word 2010 document   Microsoft Office  >  Word IT Pro Discussions

windows server 2012 r2 rds users can not change expired passwords. have farm 3 rdsh , 1 broker. hi, if user's password expires must first change using other method before can connect using remote desktop.  example, change via outlook web access or rd web access or using domain-joined workstation. please note rdweb password change capability must enabled using instructions in linked article above before end user can use it. thanks. -tp Windows Server  >  Remote Desktop Services (Terminal Services)

hello everyone, working on network support staffs needs administrators in order install legitimate soft-wares.  don't want account elevated domain admins don't want them have full administrative rights. have tried using gpo enable them activities, works on computer need @ customer point administrative password. need feedback asap. thanks hi  to give software installation on domain machine, need give particular group local admin group membership,so can create group add users group , configure "resticted groups" gpo add group client computers "local administrators group". restricted groups policy http://www.frickelsoft.net/blog/?p=13 https://technet.microsoft.com/en-us/library/cc756802(v=ws.10).aspx this posting provided no warranties or guarantees,and confers no rights. best regards burak uğur Windows Server  >...

hello our environment esx 3.5, windows 2003 sp2 enterprise servers guests. have application running on vm guest. 32bit app, have assigned 4gb ram in case. figure if ram not used, not losing anything, since not directly paying exclusive use physical box. we're in midst of refresh, , we're upgrading windows 2008 r2 servers 64bit os. i'm trying work out amount of ram assign guests host application. - should continue assign 4gb - there benefit of assigning more 4gb 32bit app (i read on ee 32bit apps see 4gb virtual address space per process, guess there multiple processes) - third option i'm thinking using perfmon baseline our existing servers , find average of memory use over, say, 48 hours. know best counter use , case of running perfmon 48 hours , using average value whatever counter? question is, 2008 handle memory in differernt way 2003 server? hi,   please check following link see whether it’s useful.   a 32-bit application ca...

hey all, my apologies in advance simple problem of you. if through history you'll see i'm not particularly happy get-eventlog / get-winevent 1 reason or (whether it's speed, output format, or incompatibility between operating systems) so i'm looking @ using wevtutil.exe pull event logs , export them in xml format. wevtutil fast, , seems work same between 2008 / 2008 r2 - output format xml , haven't experience manipulating that. lincoln atkinson gave me start @ http://social.technet.microsoft.com/forums/en-us/winserverpowershell/thread/1b4abbbd-c0de-451d-b50c-49aecc276033 created thread complain get-winevent thought i'd start new thread here deal parsing xml (joys!) whilst lincolns script pull data, it's odd in after running script few times (or once), wevtutil stop outputting anything. after bunch of trials figured may run wevtutil , have output xml first, it's nice have raw xml output anyway. this should pull failure audit events with...

i have server connected san it's out of ram , use space more hyper-v vm's.  there way expose resources on san local resource server more ram?  i've tried mapping don't show local resource and i've tried linking it errors out permissions problems though logged in domain admin. i have server connected san it's out of ram , use space more hyper-v vm's.  there way expose resources on san local resource server more ram?  i've tried mapping don't show local resource and i've tried linking it errors out permissions problems though logged in domain admin. unless run recent windows-based storage appliances windows server 2012 r2 inside (for example violin memory systems) answer - cannot. contact storage vendor don't give name (just "san" not wok sure) , there's no kind of "standard" way of doing want. starwind iscsi san & nas Windows Server ...

hey everyone, i updated new build , loving far. have couple problems need addressing.  first off, search bar doesn't work. @ all. can't life of me figure out work. "search web , windows" text can't edited @ all. highlighted. also, metro apps crash randomly , no real reason behind it. can't use windows update either, fails every time. and importantly, ui scaling across both screens little glitchy. have 4k monitor , 1080p monitor. can fix scale same across both, when sign out or use fullscreen application, goes being fine on 4k screen, , far large on 1080p. these issues minor incredibly annoying , i'd love help. hi， for search issue, have tested in user account? or connected microsoft account? if is, please disconnect microsoft account, test again, noticed users encountered issue microsoft account. meanwhile, go control panel\indexing optios\advanced\rebuild rebuild index , check if helpful. for windows store apps, suggest reinstall...

hi i have 3 domain controllers ( 1 2008 r2 ,1 2003,1 2012) i have 5 child domain servers 2008 r2 , 2003 r2 i want upgrad 2012 r2 what considerations , sequences upgrade mcp mcsa mcse mct mcts ccna hi yasser, what considerations , sequences upgrade i suggest upgrade dc below: join target os server domain promote replica dc. transfer fsmo roles new dc, ensure new dc dns server , gc. run dcdiag.exe , repadmin.exe on new dc, make sure new dc heathy. on domain members, point new dc dns server. demote former dc. if want use same ip address , computer name, please follow blog below: remove old dc , introduce new dc same name , ip address http://blogs.msmvps.com/acefekay/2010/10/09/remove-an-old-dc-and-introduce-a-new-dc-with-the-same-name-and-ip-address/ more information you: step-by-step: adding windows server 2012 domain controller existing windows server 2003 network http://blogs.technet.com/b/canitpro/archive/2013/05/05/step-by-step-adding-a-windows-ser...

we have 2 windows 2008 r2 servers in cluster configuration. have need break cluster , keep of shared folders/permissions, etc. on 1 of 2 servers in cluster. reason going converting of iscsi volumes vhdx format in order work our new copy/backup solution. can give me steps need go through after un-clustering these 2 servers, of shares still remain in usable state of user's drive mappings share names, etc. still functional? hi silbery1, thanks post. destroying cluster destroy cluster option not touch data or acls on disk.  will, obviously, lose share permissions, if have set shares concerned ntfs file security , plan on recreating them, should fine. you may refer thread discussed before decommission windows 2008 r2 file cluster https://social.technet.microsoft.com/forums/windowsserver/en-us/e136e7a8-38fc-43b9-a78e-282536f09e97/how-to-properly-decommission-a-windows-2008-r2-file-cluster?forum=winserverclustering besides, more professional cluster server, suggest discu...

we have dfs created between 2003r2 (primary) , 2008r2 (secondary dr). happened in night , lost several hundred files off primary, still exist on secondary dr server. have stopped dfs-r on both servers prevent missing files deleting on dr server, unsure can make them replicate can carry on. apparently backup last night did not work properly, or event caused happened first cannot restore backup. please guide me in how best recover event. thanks in advance matt this command mark server b primary: dfsradmin membership set /rgname:<rg name> /rfname:<rf name> /memname:<member name> /isprimary:true note: files replicated serverb to other targets. if there newer file on other target servers, backup before starting replication. technet subscriber support in forum |if have feedback on our support, please contact tnmff@microsoft.com. Windows Server ...

hi, i need test pop3 mailbox connectivity (to sure problem in not on biztalk pop3 adapter ) i tried telnet xyzserver 110 , connects (i blank screen) next expecting enter user and pass proceed commands "list" @ first keystroke session breaks no message , i'm returned windows command prompt ( this done on windows 2012 r2 standard server ) in order have term of comparison, i tried the same kind of procedure on laptop targeting gmail   i issued telnet pop.gmail.com 995 , connects (i blank screen) after 5th keystroke session breaks message "connection host lost" (this done in windows 2010) am doing wrong? what can issue here? note: created inbound , outbound firewall rules permit traffic with 110 , 995 ports help appreciated, jd this 1 might help. https://technet.microsoft.com/en-us/library/dd789740(v=exchg.80).aspx or ask on here. https://social.technet.microsoft.com/forums/en-us/home?forum=b...

have virtual server running windows 2003 standard edition sp2.  have scheduled task due run @ 01:00 am.  task runs fine if stay connected (via rdp), moment disconnect not run.  have reinput password.  following message: "vantage giga [e3c1ad18-6486-4df4-9147-452111cf7ac2].job" (webspy.vantage.exe) 15/09/2008 01:00:00 ** error **  the attempt log on account associated task failed, therefore, task did not run.  the specific error is:  0x80070569: logon failure: user has not been granted requested logon type @ computer.  verify task's run-as name , password valid , try again. the account used run task has "log on batch job" , "log on service" , "access computer network" rights.  account member of local admins too. any suggestions. hi,   scheduled tasks typically execute on console session. tasks setup within terminal server sessions run, not run interactively. if task setup within terminal server session , same user logged on @ console, t...

we have root certificate offline ca that's root of enterprise pki.  we're trying publish in ad.  properties in cert seem in order, when publish certutil, it's injected "cn=com".  certutil parsing out of cert (the output lines "ldap:///cn=com,cn=aia,cn=public key services,cn=services,cn=configuration,dc= [domain] ,dc= [ext] ?cacertificate")  any idea we're doing wrong here?  can use dscdpcontainer , dscdpcn force name? perhaps off in registry: hklm\system\currentcontrolset\services\certsvc\configuration\ <caname> dsconfigdn certutil -setreg ca\dsconfigdn "cn=configuration,dc=<domaincomponent>,dc<domaincomponent>" http://technet.microsoft.com/en-us/library/cc737740(v=ws.10).aspx Windows Server  >  S...

hi, we have configured nlb cluster on 2 windows 2008 servers , working fine till restarted servers. after restarting servers 1 of host disappeared nlb manager , when tried add host nlb cluster error "host part of cluster" shows up. if @ nlb @ other host see both host under cluster, 1 of host in converging state. the nlb working untill restart server , work when try diagonise network adapter , repair it. host still not showing under cluster on 1 host server nlb manager. please advice. hi, when using unicast within nlb normal can not show servers switch muticast , see :) dhafer Windows Server  >  High Availability (Clustering)

recently brought online new windows storage server 2008. trying copy large file it...winxp sp3 , hangs not responding. client machine win7 machine.   also getting sporadic reports of same things end-users trying copy larger files. small files not issue. to honest, not sure start looking, has seen similar. btw, can't cancel out, have hard reboot. it test large file copy using copy tool, show whether it's hardware/network limitation or windows having issues (buffered copying exhausting available memory?) i've had success using eseutl copy large files, works if it's 1 off copy wouldn't want use on regular basis. check following article: http://technet.microsoft.com/en-us/library/aa997046(v=exchg.65).aspx   another articel on buffered i/o vs. unbuffered i/o can seen here: http://blogs.msdn.com/b/granth/archive/2010/05/10/how-to-copy-very-large-files-across-a-slow-or-unreliable-network.aspx   regards,   k. ...

i have windows 2012 r2 server running game kids , friends. game supports telnet admin stuff shutdown, etc. the game buggy , needs restarted every 3 6 hours , schedule using powershell script on server.  what today: 1. start putty on remote machine. 2. connect server ip, port 3. prompted password (no username).  enter password 4. issue list player command see on more of fyi capture info log file. 5. issue command "server restarting shortly". wait few minutes 6. issue "shutdown" command cause server shutdown , restart , kills telnet session. 7. few minutes later reconnect make sure up. i mobile app or surface , have powershell script on server running.  thanks! just run scheduled task on server. unfortunately not  forum free consulting.  can answer question managing games on home pc not do. if want learn powershell , have specific question can try of help. good luck. \_(ツ)_/ ...

hi, i adding rodc exiting domain. rodc on same network our head office dc's. when getting user credentials during promotion of member server rodc, wizard querying 1 of our remote dc in country. how local rodc query accounts of local dc on same network when adding rodc domain hi, thanks reply. unfortunately change mmc server pointed too, not dc queried promotion of member server dc i have found information at: https://www.myotherpcisacloud.com/post/2013/02/09/why-are-you-talking-to-that-domain-controller!.aspx http://adriank.org/how-to-find-out-which-domain-controller-my-pc-is-talking-to/ i think need trace dns , work out how change queried dc, need help Windows Server  >  Directory Services

hello all, i unable to  change user role in site collection.i need user role , change role contribute read. can 1 please help  me  out. thanks in advance       for problem related sharepoint, please post in sharepoint forums specific assistance.   best regards dale please remember click “mark answer” on post helps you, , click “unmark answer” if marked post not answer question. can beneficial other community members reading thread. ” Windows Server  >  Windows PowerShell

i've setup new wsus 3.0 sp2 server. (note: it's configured deal updates pertaining english, windows xp, vista, 7, , office 2007.) did initial synchronization upon completeion of setup. appears have downloaded update information, not actual update files. put information in numerous folders txt files within c:\wsus\wsuscontent. from reading, believed updates not physically downloaded until approved. did test of 1 set of updates -- approved them. within 15 minutes updates downloaded server. i'd set actual update files/data downloaded after business hours. that, seems i'd have approve updates after hours since immedaitely begin downloading after approval. doesn't seem right... i'm sure i'm missing something. so question is, synchronization if data isn't triggered download until approve update? what missing? thanks help! i'd set actual update files/data downloaded after business hours. that, seems i'd have approve updates after hours s...

hello are cipher independent tls protools? i having issue site , wondering if having tls1.2 enabled prevent using cipher of 3des? hello are cipher independent tls protools? i having issue site , wondering if having tls1.2 enabled prevent using cipher of 3des? hi, do mean want disable 3des cipher on windows ? to disable 3des , set following registry key: [hkey_local_machine\system\currentcontrolset\control\securityproviders\schannel\ciphers\triple des 168] "enabled"=dword:00000000 if windows version anterior windows vista (i.e. xp, 2003), need set following registry key: [hkey_local_machine\system\currentcontrolset\control\securityproviders\schannel\ciphers\triple des 168/168] "enabled"=dword:00000000 best regards cartman please remember mark replies answers if help. if have feedback technet subscriber support, contact tnmff@microsoft.com ...

after reviewing steps need enable fqdn referrals dfs i'm bit confused. in stage 3 under step c states if have multiple namespace servers can "remove each hosted domain-based namespace server." does mean can remove 1st server namespace server tab perform remaining steps? once that's done put 1st server , remove 2nd server , same changes it, replace 2nd server in namespace server tab. i hate make assumptions find out hosed configuration. any appreciated on this. hi, yes correct. article mentioned this: generally, domain-based namespaces hosted on multiple namespace servers. therefore, when remove namespace 1 namespace server, in step, namespace availability not affected. however, should make sure there in fact more 1 namespace server hosting namespace. this, use 1 of following methods: (get-dfsnroottarget –path <namespace>).count dfsutil.exe root <namespace>   technet subscriber support in forum |if have feedback on our support...

i have defunct gpos in active directory i'd delete.  when try delete them using gui, "access denied" error.  fired adsiedit , went domain > dc=mydomain, dc=com>cn=system>cn=policies.  gpos i'm looking not there. i see lot of cn={guid} nodes.  right-click , properties dialog on each node , inspect displayname property.  defunct gpos i'm looking not there.  hidden because of security settings? (this how became defunct - messed perms).  or have been deleted , "stuck" in group policy objects folder (in group policy management console gui)?  else in adsi be?  other suggestions? solved.  found folder gpo in sysvol (which not on c: drive) , deleted it.  folder named after guid gpo.  able identify date modified timestamp on folder. Windows Server  >  ...

hi i receive mak keys vlk subscription. able use key activate different machine types windows 7? planning use same key workstations , laptop. thanks hi,   i suggest referring following threads:   http://social.technet.microsoft.com/forums/en/w7itprogeneral/thread/b660cf3d-74e2-4f97-9157-8f4148850428   http://social.technet.microsoft.com/forums/en/w7itprogeneral/thread/9238384b-3171-47ac-b323-7f5fde6d05e1   http://social.technet.microsoft.com/forums/en/winservergen/thread/0c8ea7c1-f408-48ce-a1b2-b13b8c434a5d   hope helps.   tim quan - msft   Windows Server  >  Windows Server General Forum

i setting directaccess server our child domain. i first tried using self-signed certificate. showed ip-https ok ipsec not configured because certificate not trusted. i tried generating certificate request iis , generating certificate our standalone certification server. did not work because subject field of certificate did not contain fqdn of directaccess server. contained company , location information well. i created certificate manually using certreq on our certification server. certificate loaded did not have private key attached. trying generate private key command "certutil -repairstore "serial number of certificate" generated prompt smartcard though not use smartcards. trying generate new certificate request within certificate snap-in on directaccess server fails permission denied error because domain admin , not enterprise admin. can directaccess installed enterprise admins? is else try? suggestions? thanks charlotte charlotte mccl...

i use small business server 2011 standard , windows server 2008 r2. i need shutdown windows without power off computer. i used in windows nt4 , windows2000. new system sbs2011 , windows server 2008, can't anymore , found no article that. it's important me, because ups scheduled cut power @ 10:00pm , restore power @ 6:00am. if computer powered off when ups cut power, not automatically power on when ups restore power. in bios setup, there no way schedule time turn on computer. please help.   hello, please check if looking for. /p : turns off local computer (not remote computer)—with no time-out period or warning. can use /p /d or /f. if computer not support power-off functionality, shut down when use /p, power computer remain on. shutdown http://technet.microsoft.com/en-us/library/cc732503(v=ws.10).aspx check below thread , try psshutdown tool. shutdown.exe doesn't power off , displays safe turn off computer. http://social.technet.micro...

hi everyone we have 10 vdi's running in our virtual environment , want use kms server, know kms server requires 25 requests send license (win8 , office 2013). possible lower request number or there way use kms server in virtual environments there not enough virtual machines running. note: cannot use mak keys activate windows , office because using pooled vdi's thx in advance hi shaon, thanks answer, but have solved problem via vamt. no need 25 requests, works now. all products lisenced kms keys. have nice days Windows Server  >  Setup Deployment

hi, i want add default password users(500,000 users) in ad lds. failed ldifde, know little bit csvde don't know possible csvde or not. thanks in advance. hi, csvde/ldifde both used import or export active directory data file. don't have ability set passwords directly. however, presented in kb, ldifde can set password changing unicodepwd attribute in ldif file(csvde works csv file) , importing . here kb it: how set user's password ldifde http://support.microsoft.com/kb/263991 meanwhile, can consider other methods: powershell commands (like dsmod or set-adaccountpassword) or scripts achieve want. there many samples or links of it, refer these: setting user's password http://technet.microsoft.com/en-us/library/dd391862(v=ws.10).aspx reset password , rename user using powershell (bulk) http://social.technet.microsoft.com/forums/en-us/winserverpowershell/thread/1f55bf09-ad10-4d83-84c0-bf54e73bc023 how reset user password in bulk in 2008 r2 ad ds ...

have big script uses large sql queries , each query exported trying figure out logic. doing having array of variables house sql commands , variable houses csv query.  have thought using foreach loop run sql commands , using switch set csv path (for exporting) here trying... $csvpath_tracking01 = "d:\warehouse\extract\salesforce\tracking01.csv" $csvpath_tracking30 = "d:\warehouse\extract\salesforce\tracking30.csv" $csvpath_tracking31 = "d:\warehouse\extract\salesforce\tracking31.csv" $csvpath_tracking34 = "d:\warehouse\extract\salesforce\tracking34.csv" $csvpath_tracking36 = "d:\warehouse\extract\salesforce\tracking36.csv" $csvpath_tracking52 = "d:\warehouse\extract\salesforce\tracking52.csv" $csvpath_tracking62 = "d:\warehouse\extract\salesforce\tracking62.csv" $sqlcommands = @($tracking01,$tracking30,$tracking31,$tracking34,$tracking36,$tracking52,$tracking62) foreach($cmd in $sqlcommands) ...

hello, we have server 2012 (server1) 2 network cards, each with an ip. example: ip1 - 10.1.1.50 ip2 - 192.168.10.50 i need server it resolves itself localy ip. config host file ip need. 192.168.10.50        server1 but when launch ping server1 resolve 10.1.1.50. when disable nic appears ip that need 192.168.10.50. i flush cache. https://support.microsoft.com/en-us/kb/172218 says host file first option. if not working, looking resolve ? thanks this server host aplication. app needs locate server hostname, , hostname must match 1 of 2 ip. i've solved configuring metric in tcp/ip options, lowest value have priority. thanks , regards Windows Server  >  Windows Server 2012 General ...